[1] Pramod R, Kumar GV, Gouda PS, Mathew AT. A study on the Al2O3 reinforced Al7075 metal matrix composites wear behavior using artificial neural networks. Materials Today: Proceedings. 2018;5:11376-85.
[2] Bhattacharyya D, Bowis M, Gregory J. The influence of alumina microsphere reinforcement on the mechanical behavior and weldability of a 6061 aluminum metal matrix composite. Machining of composite materials (A 95-15178 02-37), Materials Park, OH, ASM International, 1992. 1992:49-56.
[3] Lane C. The effect of different reinforcements on PCD tool life for aluminum composites. Machining of composite materials (A 95-15178 02-37), Materials Park, OH, ASM International, 1992. 1992:17-27.
[4] Nasernia E, Nouri-Khajavi M, Rezaee M. Milling tool wear prediction by feed motor current signal using MLPs and ANFIS. Aerospace Mechanics Journal. 2019;15:51-62.
[5] Lin J, Bhattacharyya D, Kecman V. Multiple regression and neural networks analyses in composites machining. Composites Science and Technology. 2003;63:539-48.
[6] Azmi A, Lin R, Bhattacharyya D. Tool wear prediction models during end milling of glass fibre-reinforced polymer composites. The International Journal of Advanced Manufacturing Technology. 2013;67:701-18.
[7] Wiciak-Pikuła M, Felusiak-Czyryca A, Twardowski P. Tool wear prediction based on artificial neural network during aluminum matrix composite milling. Sensors. 2020;20:5798.
[8] Fadaei A, Sori M. Prediction of cutting speed and feed effects on residual stresses in AISI 1045 steel turning shafts using artificial neural network. Sharif Journal of Mechanical Engineering. 2019;35:123-32.
[9] Özyürek D, Kalyon A, Yıldırım M, Tuncay T, Ciftci I. Experimental investigation and prediction of wear properties of Al/SiC metal matrix composites produced by thixomoulding method using Artificial Neural Networks. Materials & Design. 2014;63:270-7.
[10] Zhou G, Xu C, Ma Y, Wang X-H, Feng P-F, Zhang M. Prediction and control of surface roughness for the milling of Al/SiC metal matrix composites based on neural networks. Advances in Manufacturing. 2020;8:486-507.
[11] Karabulut Ş. Optimization of surface roughness and cutting force during AA7039/Al2O3 metal matrix composites milling using neural networks and Taguchi method. Measurement. 2015;66:139-49.
[12] Veeresh Kumar G, Pramod R, Shivakumar Gouda P, Rao C. Artificial Neural Networks for the Prediction of Wear Properties of Al6061-TiO2 Composites. Materials Science and Engineering Conference Series. 2017. 012046.
[13] Faraji H, Taheri M. Sensitivity analysis of parameters affecting cutting speed and dimensional deviation of wire electrical discharge machining. Mechanic of Advanced and Smart Materials. 2022;2:310.
[14] Tahmasbi V, Baghi MH, Aeinehbandy S, Sousanabadi Farahani A. Sensitivity analysis and optimization of material removal rate and surface quality in aluminum matrix composite. Modares Mechanical Engineering. 2023;23:395-404.
[15] Das D, Pradhan SK, Sahoo AK, Panda A, Satpathy MP, Samal C. Tool wear and cutting force investigations during turning 15 wt% SiCp-Al 7075 metal matrix composite. Materials Today: Proceedings. 2020;26:854-9.
[16] Zare Chavoshi S. Tool flank wear prediction in CNC turning of 7075 AL alloy SiC composite. Production Engineering. 2011;5:37-47.
[17] Elsadek A, Gaafer A, Lashin A. Prediction of Roughness and Tool Wear in Turning of Metal Matrix Nanocomposites. J Eng App Sci. 2017;64:387-408.
[18] Prakash U, Yogavardhanaswamy G, Prasad SA, Ravindra H, Rajan T. Tool wear prediction by regression analysis in turning A356 with 10% SiC. 2011 IEEE Recent Advances in Intelligent Computational Systems: IEEE; 2011. 682-7.
[19] Liu H, Zong W. Prediction model of tool wear volume in precision turning of ceramic particle reinforced aluminum matrix composites. The International Journal of Advanced Manufacturing Technology. 2019;100:2689-700.
[20] Taheri M, Ghane F. Investigating the effective parameters on the mechanical properties of composites reinforced by jute fiber in the compression molding process. Mechanic of Advanced and Smart Materials. 3(4):413-431.
[21] Cukier R, Levine H, Shuler K. Nonlinear sensitivity analysis of multiparameter model systems. Journal of Computational Physics. 1978;26:1-42.
[22] Saltelli A. Making best use of model evaluations to compute sensitivity indices. Computer Physics Communications. 2002;145:280-97.