Abdi, Hamid The Effect Of Initial Release Point On Particle Motion In Acoustic Levitation [(Articles in Press)]
Adineh, Mahdi Natural Frequency analysis of Multi-directional Functionally Graded Rectangular Plates on elastic Foundation using Three-dimensional Elasticity Theory [Volume 4, Issue 1, 2024, Pages 40-63]
Ahmadi, Reyhane Improving properties of polyimide membrane using modified MOF for CO2/CH4 and CO2/N2 separations [Volume 4, Issue 4, 2025, Pages 669-683]
Akhondi, Ali Modeling and Global Sensitivity Analysis of Surface Roughness in Cortical Bone Grinding process [Volume 5, Issue 1, 2025, Pages 20-42]
Alaei, Mohammad Hossein Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
Alizadeh, Ali Manufacturing and Evaluation of Mechanical Properties of Aluminum Matrix Composites Reinforced with Continuous Carbon Fibers Using Melting and Casting Process [Volume 3, Issue 4, 2024, Pages 466-490]
Alizadeh, Ali Investigating wear behavior of Al/Al2O3/Gr hybrid composite prepared by centrifugal casting method [Volume 3, Issue 3, 2023, Pages 285-309]
Amin Far, Mohammad Reza Investigating the Mechanical and Dynamic Characteristics of Healthy and Cancerous Mouse Brain Cells Using Atomic Force Microscopy and FEM Numerical Modeling [Volume 4, Issue 4, 2025, Pages 645-668]
Amoochi, Abbas Numerical optimization of the blank shape in order to minimize the earring defect in the deep drawing process of square sections [Volume 3, Issue 1, 2023, Pages 67-82]
Amoochi, Abbas Systematic Review of the Theories and Applications of Acoustic Levitation of Liquids [Volume 3, Issue 3, 2023, Pages 310-324]
Ansari, Mehdi Time Dependent Analysis of the Behavior of GFRP-Strengthened Steel Tubes under Stepwise Loading and Stress Relaxation [(Articles in Press)]
Ansari, Mohammad Robust PI-based Data Fusion Approach for an INS/DVL Autonomous Underwater Positioning System [(Articles in Press)]
Arjmand, Hamid Optimization of Composite Shaft Subjected to Torsional Loading by Using Genetic Algorithm and Particle Swarm Optimization Methods [Volume 4, Issue 1, 2024, Pages 64-85]
Aryanipour, Baran Mechanical Specifications of the Skin Normal and Cancerous Cells Using Atomic Force Microscope [Volume 2, Issue 3, 2022, Pages 299-309]
Asadi, Kamran Optimal placement of the sensors for Static Output Feedback of fluttering plates in the supersonic flow [Volume 2, Issue 1, 2022, Pages 73-93]
Asgari, Tahmoores Out of plane vibration analysis of single-walled carbon nanotubes using stress and strain gradient theories based on Donnell's thin shell theory [Volume 1, Issue 2, 2022, Pages 201-215]
Aslani, Mohammad Stress induction in steel parts using alternating magnetic field [Volume 3, Issue 3, 2023, Pages 363-379]
Azamirad, Ghasem Optimization of Composite Shaft Subjected to Torsional Loading by Using Genetic Algorithm and Particle Swarm Optimization Methods [Volume 4, Issue 1, 2024, Pages 64-85]
Azarakhsh, Ali Akbar Redesign of the E-637 Air Fin Cooler in the Hydrocracking Unit at Shazand Refinery: A Combined Approach Utilizing Numerical Simulation, Analytical Modeling, and Experimental Data [(Articles in Press)]
Azimi, Seyfollah Numerical and experimental analysis of the parameters affecting the distortion phenomenon in the welding of wind turbine tower flange [Volume 3, Issue 2, 2023, Pages 174-193]
Azizi, Hossein Investigating mechanical properties of laser welding of st37 steel sheet using nd:yag laser [Volume 3, Issue 1, 2023, Pages 111-134]
B
Babaei, Amir Mohammad Experimental investigation of induction hardening operation of the Saina vehicle’s Tulip part [Volume 5, Issue 1, 2025, Pages 72-87]
Babaei Zarch, Mohammad reza Investigation of the effect of alomina nanoparticle on stir casting method parameters on mechanical properties of aluminum-based nanocomposites [Volume 4, Issue 3, 2024, Pages 479-496]
Bagheri nouri, Mohammad Investigation Of effects Of Structural Defects On A Phononic Crystal Heterostructure Waveguide [Volume 2, Issue 2, 2022, Pages 123-133]
Bagheri nouri, Mohammad A review of methods of achieving the optimal band gap in two-dimensional phononic crystal structures [Volume 3, Issue 3, 2023, Pages 325-345]
Bagheri nouri, Mohammad Investigation of inclusion dimensional parameters effect on the band gap of tungsten-rubber phononic crystal plate [Volume 5, Issue 1, 2025, Pages 1-19]
Bagherzadeh, Rooholah Fabrication and Evaluation Energy Harvesting based on Smart Triboelectric Material [Volume 1, Issue 1, 2021, Pages 72-87]
Bahadory, Alireza Design and Manufacture of Low-Pressure Hydroforming Machine for Aluminum Tubes and Production of Rectangular Cross Section [Volume 2, Issue 2, 2022, Pages 156-171]
Bahrami, Mahdi Buckling Analysis of a Functionally Graded unidirectional rectangular nanoPlate considering the surface effect [Volume 3, Issue 1, 2023, Pages 21-52]
Bambaeechee, Mohsen Exact analysis of transverse free vibration behavior of AFGM Timoshenko beams with general boundary conditions and tip masses [Volume 4, Issue 2, 2024, Pages 272-307]
Baniasadi, Ali Experimental Study on Additive Friction Stir-Enabled Solid State Manufacturing For The Repair of Copper. [Volume 4, Issue 3, 2024, Pages 369-386]
Bathaee, Seyed Hasan Study of Severe Plastic Deformation Process Based on E-Fast Sensitivity Analysis to Optimize Parameters [Volume 1, Issue 1, 2021, Pages 88-105]
Bathaee, Seyed Hasan Study of DNA nanoparticle manipulation using atomic force microscopy based on finite element method using theories of contact mechanics [Volume 1, Issue 2, 2022, Pages 155-174]
Bathaee, Seyed Hasan Investigation of hydroforming process loading paths based on experimental and improvement based on Sobol sensitivity analysis [Volume 2, Issue 1, 2022, Pages 53-72]
Bathaee, Seyed Hasan Experimental study and examination of failure zone factors and causes of destruction of thick metal sheets of rail cranes: mechanical properties, chemical analysis and metallography [Volume 3, Issue 2, 2023, Pages 267-284]
Bayat Kazazi, Mahdi Numerical optimization of the blank shape in order to minimize the earring defect in the deep drawing process of square sections [Volume 3, Issue 1, 2023, Pages 67-82]
Beyranvand, Hamed Experimental and numerical investigation of impact properties of epoxy biocomposite reinforced with nanocellulose and Lorestan rosemary plant extract [Volume 4, Issue 4, 2025, Pages 541-562]
Beyranvand, Ramin Time Dependent Analysis of the Behavior of GFRP-Strengthened Steel Tubes under Stepwise Loading and Stress Relaxation [(Articles in Press)]
Bisadi, Hossein Numerical study of a micro-alloyed steel microstructure during hot rolling process [Volume 2, Issue 3, 2022, Pages 365-384]
Bolhassani, Nader Investigation of the effect of ultrasonic shock on corrosion behavior of stainless steel 316 [Volume 2, Issue 2, 2022, Pages 220-234]
Boroumand, Farzad Design of mechanical components for Brushless DC Motor [Volume 2, Issue 3, 2022, Pages 347-364]
Boroumand, Farzad simulation of the forming of jet engine compressor spools by ring rolling process [Volume 3, Issue 2, 2023, Pages 216-235]
C
Chavoshi, Mahdi Numerical optimization of the blank shape in order to minimize the earring defect in the deep drawing process of square sections [Volume 3, Issue 1, 2023, Pages 67-82]
D
Dehghan, Mehdi simulation of the forming of jet engine compressor spools by ring rolling process [Volume 3, Issue 2, 2023, Pages 216-235]
Dehghan Hamadan, Ali Investigation of the effect of alomina nanoparticle on stir casting method parameters on mechanical properties of aluminum-based nanocomposites [Volume 4, Issue 3, 2024, Pages 479-496]
Dehghani, Davood The Effect Of Initial Release Point On Particle Motion In Acoustic Levitation [(Articles in Press)]
Derakhshanfard, Rasoul Performance analysis in square cyclones using Sobol statistical sensitivity analysis method [Volume 2, Issue 4, 2023, Pages 401-412]
Dousti, Behrooz Investigating the effect of nanocellulose and nanoparticles of rosemary extract on elastic and antibacterial properties of epoxy-based biocomposite [Volume 3, Issue 4, 2024, Pages 491-515]
E
Ebadi, Abtin Improving properties of polyimide membrane using modified MOF for CO2/CH4 and CO2/N2 separations [Volume 4, Issue 4, 2025, Pages 669-683]
Ebrahimi, Rasoul Feasibility study of using the magnetic flux leakage test method in detecting defects in the coating of supply and distribution gas lines [Volume 2, Issue 4, 2023, Pages 432-448]
Eghdami, Zahra Experimental study of surface roughness of brass micro-drilling to optimize parameters using E-Fast statistical method [Volume 1, Issue 2, 2022, Pages 216-230]
Emami, Seyed Mohsen Microstructure and Tensile Properties of Dual-phase Steels with Variable Manganese Content [(Articles in Press)]
Eskandari Jam, Jafar Interlaminar Defect Identification by Vibration Correlation Technique in Filament Winding Cylinder Under Axial Loading [Volume 3, Issue 2, 2023, Pages 236-266]
Eskandari Jam, Jafar investigate the response of hierarchical square thin-walled structures that made of ABS polymer and made by a 3D printer under lateral impact [Volume 4, Issue 1, 2024, Pages 158-188]
Eskandari Jam, Jafar Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
Esmaeili, Mostafa Experimental Analysis of Flow-Induced Vibrations and Energy Harvesting in a Wind Tunnel Using Tree Leaf-Inspired Geometries [Volume 4, Issue 4, 2025, Pages 684-701]
Esmailian, Mojtaba Optimization of the nosing process of metal pipe using genetic algorithm [Volume 2, Issue 2, 2022, Pages 188-201]
Esmailian, Mojtaba Design of mechanical components for Brushless DC Motor [Volume 2, Issue 3, 2022, Pages 347-364]
Esmailian, Mojtaba simulation of the forming of jet engine compressor spools by ring rolling process [Volume 3, Issue 2, 2023, Pages 216-235]
Ezazdi, Hadi Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
F
Farahani, Ali Investigation and Sensitivity Analysis of the Effect of Different Parameters on Tool Wear During Dry Turning Process of Aluminum Matrix Composites Using E-Fast Method [Volume 4, Issue 2, 2024, Pages 308-327]
Faraji, Alireza Using Sliding Mode Nonlinear Control Method to Model Nanomanipulation Process using Atomic Force Microscope [(Articles in Press)]
Faraji, Hamed Sensitivity analysis of parameters affecting cutting speed and dimensional deviation of wire electrical discharge machining [Volume 2, Issue 3, 2022, Pages 310-327]
Faraji, Hamed Investigation and Sensitivity Analysis of the Effect of Different Parameters on Tool Wear During Dry Turning Process of Aluminum Matrix Composites Using E-Fast Method [Volume 4, Issue 2, 2024, Pages 308-327]
Farhadi, Sirwan Optimal placement of the sensors for Static Output Feedback of fluttering plates in the supersonic flow [Volume 2, Issue 1, 2022, Pages 73-93]
Farhadi, Sirwan Stress induction in steel parts using alternating magnetic field [Volume 3, Issue 3, 2023, Pages 363-379]
Farhadi, Sirwan Design and weight optimization of a manned hybrid octocopter [Volume 4, Issue 3, 2024, Pages 425-448]
Farhadian, Amir Fabricate a Magnetic Nano Slime and Its Applications [Volume 3, Issue 3, 2023, Pages 398-412]
Farrokh Abadi, amin Investigating the effect of fluid-structure interaction on the vibrations of fiber-metal laminated cylindrical shells bonded by piezoelectric actuator and sensor layer [Volume 2, Issue 4, 2023, Pages 449-462]
Farzami, Faezeh Catalytic Degradation of tetracycline in Aqueous Media via LaMnO3 Nanostructures in Advanced Oxidation Process [Volume 4, Issue 2, 2024, Pages 350-368]
Fazlali, Alireza Catalytic Degradation of tetracycline in Aqueous Media via LaMnO3 Nanostructures in Advanced Oxidation Process [Volume 4, Issue 2, 2024, Pages 350-368]
G
Ghaderi, Omid Experimental investigation of induction hardening operation of the Saina vehicle’s Tulip part [Volume 5, Issue 1, 2025, Pages 72-87]
Ghadimian, Tannaneh Implementation of a Virtual Piano using Image Processing [(Articles in Press)]
Ghane, Fereshteh Investigating the effective parameters on the mechanical properties of composites reinforced by jute fiber in the compression molding process [Volume 3, Issue 4, 2024, Pages 413-431]
Ghasemi, Mohsen Buckling Analysis of a Functionally Graded unidirectional rectangular nanoPlate considering the surface effect [Volume 3, Issue 1, 2023, Pages 21-52]
Ghasemi, Mohsen Analysis of the Vibrational Characteristics of a Sandwich Plate with an Auxetic Core Reinforced with Carbon Fibers under Aerodynamic Forces [Volume 5, Issue 1, 2025, Pages 43-71]
Ghasemi-Ghalebahman, Ahmad Investigation of the Effect of Texture on the Deformation Behavior of Additively Manufactured 316L Stainless Steel Using the Crystal Plasticity Finite Element Method [Volume 4, Issue 3, 2024, Pages 387-403]
Ghasemi Ghale-Bahman, Ahmad Investigating the effect of fluid-structure interaction on the vibrations of fiber-metal laminated cylindrical shells bonded by piezoelectric actuator and sensor layer [Volume 2, Issue 4, 2023, Pages 449-462]
Ghayour, Mostafa Energy Harvesting from Beam Vibrations with Piezoelectric Patch under Transient Non-Contact Mass, Applicable in Speed Bumps [Volume 4, Issue 4, 2025, Pages 579-596]
Ghomeshi Bozorg, Mehran Dynamic Instability Analysis of Rectangular Plates under Periodic Passage of Oscillating Rigid Bodies [Volume 2, Issue 3, 2022, Pages 235-256]
Ghorbanpour Arani, Ali The Effect of porosity distribution on the free vibration of tapered nanocomposite sandwich beam [Volume 4, Issue 1, 2024, Pages 1-19]
Gohari, Mohammad Fabrication and Evaluation Energy Harvesting based on Smart Triboelectric Material [Volume 1, Issue 1, 2021, Pages 72-87]
Golmakani, Hamid Numerical and experimental comparison of deep drawing process of the square sample with rubber matrix and metal die [Volume 2, Issue 2, 2022, Pages 172-187]
Gudarzi, Abdollah Thermoelastic Analysis of the FGM Rotating Disk Structure in the Free Turbine of the Turboshaft Engine Using the Differential Quadratic Method [Volume 3, Issue 4, 2024, Pages 516-536]
H
Habibnejad korayem, Moharram Sensitivity Analysis of contact frictional models of Biological Particles on Rough Surface in Liquid Environment by E-Fast Method [Volume 4, Issue 1, 2024, Pages 86-121]
Hadipour, Fatemeh Investigating the effect of nanocellulose and nanoparticles of rosemary extract on elastic and antibacterial properties of epoxy-based biocomposite [Volume 3, Issue 4, 2024, Pages 491-515]
Haghani, Ahmad Study of Buckling and Post-buckling Behavior of Composite Beam Reinforced with Graphene Nanoplatelets Using Non-local Strain Gradient Theory [Volume 4, Issue 2, 2024, Pages 328-349]
Hajimousaei, Behnam investigate the response of hierarchical square thin-walled structures that made of ABS polymer and made by a 3D printer under lateral impact [Volume 4, Issue 1, 2024, Pages 158-188]
Hajiveiseh, Mona Bending and Buckling Analysis of Functionally Porous Beam by First Order Shear Deformation Theory [Volume 1, Issue 1, 2021, Pages 32-42]
Hashemi, Seyed Jala Design and Manufacture of Low-Pressure Hydroforming Machine for Aluminum Tubes and Production of Rectangular Cross Section [Volume 2, Issue 2, 2022, Pages 156-171]
Hashemian, Mohammad Modeling and Optimization of Relative Viscosity and Thermal Conductivity Ratio of Water-Based MWCNT-Y2O3 Hybrid Nanofluid Using Artificial Neural Network and Multi-Objective Particle Swarm Optimization [(Articles in Press)]
Heidary, Farhad Water softening by a Polymeric Membrane Containing GO and FeOOH Nanoparticles [Volume 2, Issue 4, 2023, Pages 393-400]
Hemmati, Milad Experimental Investigation of Adhesion of Synthetic Pyramid Shape Gecko-like Micro-structured Adhesive for Grippers Made of Silgard 184 [Volume 1, Issue 1, 2021, Pages 43-55]
Heydari, Hamed Redesign of the E-637 Air Fin Cooler in the Hydrocracking Unit at Shazand Refinery: A Combined Approach Utilizing Numerical Simulation, Analytical Modeling, and Experimental Data [(Articles in Press)]
Heydari, Zahra The Effect Of Initial Release Point On Particle Motion In Acoustic Levitation [(Articles in Press)]
Heydari Beni, Mohsen Interlaminar Defect Identification by Vibration Correlation Technique in Filament Winding Cylinder Under Axial Loading [Volume 3, Issue 2, 2023, Pages 236-266]
Heydari Beni, Mohsen Manufacturing and Evaluation of Mechanical Properties of Aluminum Matrix Composites Reinforced with Continuous Carbon Fibers Using Melting and Casting Process [Volume 3, Issue 4, 2024, Pages 466-490]
Heydari Beni, Mohsen investigate the response of hierarchical square thin-walled structures that made of ABS polymer and made by a 3D printer under lateral impact [Volume 4, Issue 1, 2024, Pages 158-188]
Heydari Beni, Mohsen Numerical and Experimental Analysis of Response of Sandwich Panel with Fiber Metal Laminate (FML) Skin and Aluminum Foam Core under High Velocity Impact [Volume 4, Issue 3, 2024, Pages 404-424]
Heydari Meybodi, Mahdi Optimization of Composite Shaft Subjected to Torsional Loading by Using Genetic Algorithm and Particle Swarm Optimization Methods [Volume 4, Issue 1, 2024, Pages 64-85]
Homayooni, Ahmad Investigation and Sensitivity Analysis of the Effect of Different Parameters on Tool Wear During Dry Turning Process of Aluminum Matrix Composites Using E-Fast Method [Volume 4, Issue 2, 2024, Pages 308-327]
Hooshangi, Hasan Investigation of the effect of turbulent friction process parameters on the surface mechanical properties of AZ31B/CNT nanocomposite using Sobel sensitivity analysis [Volume 2, Issue 1, 2022, Pages 108-122]
Hosseini, Sayed Mohsen Fabrication of selective heterogeneous cation exchange membrane by using synthesized metal-organic framework for heavy metal ions removal from water [(Articles in Press)]
Hosseini, Seyed Mohammad Microstructure and Tensile Properties of Dual-phase Steels with Variable Manganese Content [(Articles in Press)]
Hosseini, S. H. Design and Finite Element Analysis of Cycloidal Gearboxes [Volume 4, Issue 2, 2024, Pages 238-255]
Hosseini-Hashemi, Kamiar A Unique Approach to Investigate the Free Vibrations of Non-uniform and Functionally Graded Euler-Bernoulli Beams [Volume 2, Issue 4, 2023, Pages 463-487]
Hosseini-Hashemi, Kamiar The exact characteristic equation of frequency and mode shape for transverse vibrations of non-uniform and non-homogeneous Euler Bernoulli beam with general non-classical boundary conditions at both ends [Volume 3, Issue 1, 2023, Pages 1-20]
Hosseini-Hashemi, Shahriar A Unique Approach to Investigate the Free Vibrations of Non-uniform and Functionally Graded Euler-Bernoulli Beams [Volume 2, Issue 4, 2023, Pages 463-487]
Hosseini-Hashemi, Shahriar The exact characteristic equation of frequency and mode shape for transverse vibrations of non-uniform and non-homogeneous Euler Bernoulli beam with general non-classical boundary conditions at both ends [Volume 3, Issue 1, 2023, Pages 1-20]
Hosseini Toudeshky, Hossein Estimation of Fatigue Life in Al alloy Specimens Using FEA [Volume 1, Issue 1, 2021, Pages 56-71]
J
Jabarzadeh, Sina Investigation of the Effect of Texture on the Deformation Behavior of Additively Manufactured 316L Stainless Steel Using the Crystal Plasticity Finite Element Method [Volume 4, Issue 3, 2024, Pages 387-403]
Jabbari, Ali An Analytical, Numerical and Experimental Study on Demagnetization Phenomena in Permanent Magnet Line-Start Machine [Volume 3, Issue 2, 2023, Pages 157-173]
Jabbari, Ali Experimental Study on Additive Friction Stir-Enabled Solid State Manufacturing For The Repair of Copper. [Volume 4, Issue 3, 2024, Pages 369-386]
Jafari, Ali Mechanical Analysis of Human Healthy and Cancerous Bone Cells Applying Atomic Force Microscope [Volume 4, Issue 3, 2024, Pages 513-540]
Jafari Mehrabadi, Saeed Out of plane vibration analysis of single-walled carbon nanotubes using stress and strain gradient theories based on Donnell's thin shell theory [Volume 1, Issue 2, 2022, Pages 201-215]
Jafari Mehrabadi, Saeed Deflection analysis of composite micro-beam on elastic foundation by strain gradient theory [Volume 2, Issue 1, 2022, Pages 94-107]
Jalali, Ali Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
Jalili, Mohamadreza Design and construction of INS/GPS navigation system based on adaptive Kalman filter algorithm [Volume 3, Issue 4, 2024, Pages 537-559]
Jamshidi, F Environmental conditions effect on mechanical properties and mode II fracture toughness of composite multilayers with woven fibers glass /vinyl ester [Volume 3, Issue 3, 2023, Pages 380-397]
Jamshidi, Iman Numerical study of a micro-alloyed steel microstructure during hot rolling process [Volume 2, Issue 3, 2022, Pages 365-384]
Jedi, Mahmoud Investigating the effect of fluid-structure interaction on the vibrations of fiber-metal laminated cylindrical shells bonded by piezoelectric actuator and sensor layer [Volume 2, Issue 4, 2023, Pages 449-462]
Joudaki, Jalal Design and Finite Element Analysis of Cycloidal Gearboxes [Volume 4, Issue 2, 2024, Pages 238-255]
K
Karami Khorramabadi, Mahdi Investigating the effect of nanocellulose and nanoparticles of rosemary extract on elastic and antibacterial properties of epoxy-based biocomposite [Volume 3, Issue 4, 2024, Pages 491-515]
Karami Khorramabadi, Mahdi Experimental and numerical investigation of impact properties of epoxy biocomposite reinforced with nanocellulose and Lorestan rosemary plant extract [Volume 4, Issue 4, 2025, Pages 541-562]
Karimi, Mahdi Piezoelectric Energy Harvesting from Functionally Graded Beams Using Modified Shear Deformation Theories [Volume 1, Issue 2, 2022, Pages 136-154]
Kashfi, Mohammad Effect of Internal Cellular Geometry on the Impact Performance of 3D-Printed Structures [Volume 4, Issue 4, 2025, Pages 623-644]
Kazemi, Hossein Enhancing Mode II Interlaminar Fracture Toughness in Glass/Epoxy Composites Using 3D-Printed Polyvinyl Alcohol Interlayer [Volume 4, Issue 2, 2024, Pages 256-271]
Kazemi, Hossein Effect of Internal Cellular Geometry on the Impact Performance of 3D-Printed Structures [Volume 4, Issue 4, 2025, Pages 623-644]
Keshvari Tabatabaei, Farzaneh Sadat Investigating and comparing the thermal performance of thermosyphon with different working fluids and filling ratios [Volume 3, Issue 1, 2023, Pages 95-110]
Keshvari Tabatabaei, Seyed Saeed Design and Construction of Heating-Cooling Chamber Using Waste Energy of Vehicles [Volume 3, Issue 2, 2023, Pages 135-156]
Khalaj, Rahele Water softening by a Polymeric Membrane Containing GO and FeOOH Nanoparticles [Volume 2, Issue 4, 2023, Pages 393-400]
Khalili, Mohammad Study of DNA nanoparticle manipulation using atomic force microscopy based on finite element method using theories of contact mechanics [Volume 1, Issue 2, 2022, Pages 155-174]
Khalili, Mohammad Investigating and comparing the thermal performance of thermosyphon with different working fluids and filling ratios [Volume 3, Issue 1, 2023, Pages 95-110]
Khalili, Mohammad Design and Construction of Heating-Cooling Chamber Using Waste Energy of Vehicles [Volume 3, Issue 2, 2023, Pages 135-156]
Khalili, Omid Sensitivity analysis of effective parameters on bone drilling force by using E-fast method [Volume 3, Issue 1, 2023, Pages 83-94]
Khandani, Khosro Design and implementation of a 3D photocopier with photogrammetric method using linear delta robot [Volume 2, Issue 2, 2022, Pages 134-155]
Khodadadi, Mohammad Out of plane vibration analysis of single-walled carbon nanotubes using stress and strain gradient theories based on Donnell's thin shell theory [Volume 1, Issue 2, 2022, Pages 201-215]
Khodadadi, Mohammad Solution of out-of-Plane vibration of moderately thick rectangular nano-plate using nonlocal sinusoidal shear deformation theory [Volume 1, Issue 2, 2022, Pages 231-246]
Khorshidi, Korosh Piezoelectric Energy Harvesting from Functionally Graded Beams Using Modified Shear Deformation Theories [Volume 1, Issue 2, 2022, Pages 136-154]
Khorshidi, Korosh Buckling Analysis of a Functionally Graded unidirectional rectangular nanoPlate considering the surface effect [Volume 3, Issue 1, 2023, Pages 21-52]
Khorshidi, Korosh Forced vibration of a three-layer cylindrical shell with an auxetic core containing fluid under the influence of shock load using high-order shear deformation theories [Volume 3, Issue 4, 2024, Pages 432-465]
Khorshidi, Korosh Analysis of the Vibrational Characteristics of a Sandwich Plate with an Auxetic Core Reinforced with Carbon Fibers under Aerodynamic Forces [Volume 5, Issue 1, 2025, Pages 43-71]
Khoshgoftar, Mohammad Javad Bending and Buckling Analysis of Functionally Porous Beam by First Order Shear Deformation Theory [Volume 1, Issue 1, 2021, Pages 32-42]
Khosravi, Mohammad Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
L
Lafouti, Mansoureh Mechanical Analysis of Human Healthy and Cancerous Bone Cells Applying Atomic Force Microscope [Volume 4, Issue 3, 2024, Pages 513-540]
Lafouti, Mansoureh Investigating the Mechanical and Dynamic Characteristics of Healthy and Cancerous Mouse Brain Cells Using Atomic Force Microscopy and FEM Numerical Modeling [Volume 4, Issue 4, 2025, Pages 645-668]
M
Madani, Amir Hossein Mechanical Specifications of the Skin Normal and Cancerous Cells Using Atomic Force Microscope [Volume 2, Issue 3, 2022, Pages 299-309]
Mahdian, Asghar Numerical and experimental analysis of the parameters affecting the distortion phenomenon in the welding of wind turbine tower flange [Volume 3, Issue 2, 2023, Pages 174-193]
Mahdizadeh Rokhi, Masoud Investigation of the effect of alomina nanoparticle on stir casting method parameters on mechanical properties of aluminum-based nanocomposites [Volume 4, Issue 3, 2024, Pages 479-496]
Mallahi Kolahi, Pouya Trajectory Tracking of an Intelligent Mobile Robot on a Slope Surface using the Nonlinear Sliding Mode Control [Volume 1, Issue 1, 2021, Pages 1-14]
Mallahi Kolahi, Pouya Position and Speed Control of the Tractor-Trailer Robot by Considering the Dynamics of the Tractor Wheels Using the PID Controller [Volume 3, Issue 1, 2023, Pages 53-66]
Manshoor, D. Design and Finite Element Analysis of Cycloidal Gearboxes [Volume 4, Issue 2, 2024, Pages 238-255]
Mansouri, Ehsan Investigation of the effect of turbulent friction process parameters on the surface mechanical properties of AZ31B/CNT nanocomposite using Sobel sensitivity analysis [Volume 2, Issue 1, 2022, Pages 108-122]
Maraki, Mohammadreza Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
Marandi, Maziar Design and numerical modeling of CdTe nanostructured thin film solar cell and the effect of CdSeXTe1-X intermediate layer on the efficiency enhancement by SCAPS-1D software [Volume 2, Issue 4, 2023, Pages 385-392]
Masoomi, Hassan Fabrication and Evaluation Energy Harvesting based on Smart Triboelectric Material [Volume 1, Issue 1, 2021, Pages 72-87]
Masoomi, Mohammad Yaser Fabrication of selective heterogeneous cation exchange membrane by using synthesized metal-organic framework for heavy metal ions removal from water [(Articles in Press)]
Mazdak, Siamak Systematic Review of the Theories and Applications of Acoustic Levitation of Liquids [Volume 3, Issue 3, 2023, Pages 310-324]
Meighani Nejad, Abolfazl Design and construction of INS/GPS navigation system based on adaptive Kalman filter algorithm [Volume 3, Issue 4, 2024, Pages 537-559]
Mir Mohammad Hossein Ahari, Seyed Mahyar Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
Moayeedi, Ehsan Deflection analysis of composite micro-beam on elastic foundation by strain gradient theory [Volume 2, Issue 1, 2022, Pages 94-107]
Modabberifar, Mehdi Experimental Investigation of Adhesion of Synthetic Pyramid Shape Gecko-like Micro-structured Adhesive for Grippers Made of Silgard 184 [Volume 1, Issue 1, 2021, Pages 43-55]
Modabberifar, Mehdi Feasibility study of using the magnetic flux leakage test method in detecting defects in the coating of supply and distribution gas lines [Volume 2, Issue 4, 2023, Pages 432-448]
Mohammad Aliha, Mohammad Reza Investigating the effect of fluid-structure interaction on the vibrations of fiber-metal laminated cylindrical shells bonded by piezoelectric actuator and sensor layer [Volume 2, Issue 4, 2023, Pages 449-462]
Mohammadi, Mohammad Javad Investigating the effectiveness of polymethyl methacrylate drilling parameters using coated tools. [Volume 4, Issue 4, 2025, Pages 563-578]
Mohammadi, Rafat Systematic Review of the Theories and Applications of Acoustic Levitation of Liquids [Volume 3, Issue 3, 2023, Pages 310-324]
Mohseni, Matineh Defining of Mechanical Properties of Ago-1522 Living Cell Using Atomic Force Microscope [Volume 2, Issue 1, 2022, Pages 1-12]
Mokhtari, Afshin Design and implementation of a 3D photocopier with photogrammetric method using linear delta robot [Volume 2, Issue 2, 2022, Pages 134-155]
Mokhtarian, Ali Modeling and Optimization of Relative Viscosity and Thermal Conductivity Ratio of Water-Based MWCNT-Y2O3 Hybrid Nanofluid Using Artificial Neural Network and Multi-Objective Particle Swarm Optimization [(Articles in Press)]
Momeni, Hossein Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
Moradi besheli, Saman Numerical and experimental comparison of deep drawing process of the square sample with rubber matrix and metal die [Volume 2, Issue 2, 2022, Pages 172-187]
Moradzadeh, Hassan Design and implementation of a 3D photocopier with photogrammetric method using linear delta robot [Volume 2, Issue 2, 2022, Pages 134-155]
Moradzadeh, Hassan Implementation of a Virtual Piano using Image Processing [(Articles in Press)]
Moslemi Naeini, Hasan Investigation of hydroforming process loading paths based on experimental and improvement based on Sobol sensitivity analysis [Volume 2, Issue 1, 2022, Pages 53-72]
Mostafavi, Seyed Alireza Investigating and comparing the thermal performance of thermosyphon with different working fluids and filling ratios [Volume 3, Issue 1, 2023, Pages 95-110]
Mostafavi, Seyed Alireza Design and Construction of Heating-Cooling Chamber Using Waste Energy of Vehicles [Volume 3, Issue 2, 2023, Pages 135-156]
Mozafari, Hamid Experimental investigation of mechanical properties of modified tourmaline on epoxy/silica nanocomposite [Volume 3, Issue 4, 2024, Pages 560-575]
Mozafari, Hamid Experimental and numerical investigation of impact properties of epoxy biocomposite reinforced with nanocellulose and Lorestan rosemary plant extract [Volume 4, Issue 4, 2025, Pages 541-562]
N
Nadaf, Alireza Finite element and experimental investigation of the direct flow forming process of thin-walled high-strength steel tubes [Volume 4, Issue 1, 2024, Pages 122-138]
Najafizadeh, Mohamad Mehdi Numerical optimization of the blank shape in order to minimize the earring defect in the deep drawing process of square sections [Volume 3, Issue 1, 2023, Pages 67-82]
Najibi, Amir Investigation of the Effect of Texture on the Deformation Behavior of Additively Manufactured 316L Stainless Steel Using the Crystal Plasticity Finite Element Method [Volume 4, Issue 3, 2024, Pages 387-403]
Nasiri, Ramin Energy Harvesting from Beam Vibrations with Piezoelectric Patch under Transient Non-Contact Mass, Applicable in Speed Bumps [Volume 4, Issue 4, 2025, Pages 579-596]
Nasiri, Seyed Ehsan Manufacturing and Evaluation of Mechanical Properties of Aluminum Matrix Composites Reinforced with Continuous Carbon Fibers Using Melting and Casting Process [Volume 3, Issue 4, 2024, Pages 466-490]
Nazari, Ali Buckling Analysis of A Composite Stiffend Panel Structure In The Aircraft’s Wing [Volume 2, Issue 3, 2022, Pages 328-346]
Nazemizadeh, Mostafa Trajectory Tracking of an Intelligent Mobile Robot on a Slope Surface using the Nonlinear Sliding Mode Control [Volume 1, Issue 1, 2021, Pages 1-14]
NezamAbadi, Alireza Deflection analysis of composite micro-beam on elastic foundation by strain gradient theory [Volume 2, Issue 1, 2022, Pages 94-107]
NezamAbadi, Alireza Investigation of the effect of ultrasonic shock on corrosion behavior of stainless steel 316 [Volume 2, Issue 2, 2022, Pages 220-234]
Nickabadi, Saeid Experimental study and examination of failure zone factors and causes of destruction of thick metal sheets of rail cranes: mechanical properties, chemical analysis and metallography [Volume 3, Issue 2, 2023, Pages 267-284]
Noghabi, Mohammad Estimation of Fatigue Life in Al alloy Specimens Using FEA [Volume 1, Issue 1, 2021, Pages 56-71]
Norowzian, Hanieh Analysis of the Vibrational Characteristics of a Sandwich Plate with an Auxetic Core Reinforced with Carbon Fibers under Aerodynamic Forces [Volume 5, Issue 1, 2025, Pages 43-71]
Nourali, Ali Performance analysis in square cyclones using Sobol statistical sensitivity analysis method [Volume 2, Issue 4, 2023, Pages 401-412]
Nourbakhsh, Sayed Hassan Atomistic simulation of the effect of loading direction on the deformation mechanism of nickel-based superalloy containing a twin boundary [Volume 4, Issue 3, 2024, Pages 449-478]
Nourbakhsh, Sayed Hassan Effect of Internal Cellular Geometry on the Impact Performance of 3D-Printed Structures [Volume 4, Issue 4, 2025, Pages 623-644]
Nouri, Ashkan Microstructure and Tensile Properties of Dual-phase Steels with Variable Manganese Content [(Articles in Press)]
P
Pak, abbas Fabricate a Magnetic Nano Slime and Its Applications [Volume 3, Issue 3, 2023, Pages 398-412]
Parvizian, Fahime Fabrication of selective heterogeneous cation exchange membrane by using synthesized metal-organic framework for heavy metal ions removal from water [(Articles in Press)]
Pirali, Pooya investigate the response of hierarchical square thin-walled structures that made of ABS polymer and made by a 3D printer under lateral impact [Volume 4, Issue 1, 2024, Pages 158-188]
Pirali, Pooya Numerical and Experimental Analysis of Response of Sandwich Panel with Fiber Metal Laminate (FML) Skin and Aluminum Foam Core under High Velocity Impact [Volume 4, Issue 3, 2024, Pages 404-424]
Pirali, Pooya Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
Pour Esmaeil Fatideh, Adel Defining of Mechanical Properties of Ago-1522 Living Cell Using Atomic Force Microscope [Volume 2, Issue 1, 2022, Pages 1-12]
Pour Esmaeil Fatideh, Adel Mechanical Specifications of the Skin Normal and Cancerous Cells Using Atomic Force Microscope [Volume 2, Issue 3, 2022, Pages 299-309]
Pourmirza Agha Langroudi,, Iman Experimental Investigation of Adhesion of Synthetic Pyramid Shape Gecko-like Micro-structured Adhesive for Grippers Made of Silgard 184 [Volume 1, Issue 1, 2021, Pages 43-55]
R
Rabiee, Amir Hossein Experimental Analysis of Flow-Induced Vibrations and Energy Harvesting in a Wind Tunnel Using Tree Leaf-Inspired Geometries [Volume 4, Issue 4, 2025, Pages 684-701]
Rahgoshay, Mohammad Ali Robust PI-based Data Fusion Approach for an INS/DVL Autonomous Underwater Positioning System [(Articles in Press)]
Rahimdadi, Seyed Milad Interlaminar Defect Identification by Vibration Correlation Technique in Filament Winding Cylinder Under Axial Loading [Volume 3, Issue 2, 2023, Pages 236-266]
Rahimi, Masoud Design and implementation of a 3D photocopier with photogrammetric method using linear delta robot [Volume 2, Issue 2, 2022, Pages 134-155]
Rahimi, Mojtaba Modeling and Optimization of Relative Viscosity and Thermal Conductivity Ratio of Water-Based MWCNT-Y2O3 Hybrid Nanofluid Using Artificial Neural Network and Multi-Objective Particle Swarm Optimization [(Articles in Press)]
Rahmani, Nima Feasibility study of using the magnetic flux leakage test method in detecting defects in the coating of supply and distribution gas lines [Volume 2, Issue 4, 2023, Pages 432-448]
Rahmani, Nima Investigation and Sensitivity Analysis of the Effect of Different Parameters on Tool Wear During Dry Turning Process of Aluminum Matrix Composites Using E-Fast Method [Volume 4, Issue 2, 2024, Pages 308-327]
Rashidi Meybodi, Reza Investigation of the effect of alomina nanoparticle on stir casting method parameters on mechanical properties of aluminum-based nanocomposites [Volume 4, Issue 3, 2024, Pages 479-496]
Rezaei Ashtiani, Hamidreza Environmental conditions effect on mechanical properties and mode II fracture toughness of composite multilayers with woven fibers glass /vinyl ester [Volume 3, Issue 3, 2023, Pages 380-397]
Rezaeisaray, Mehdi Piezoelectric Energy Harvesting from Functionally Graded Beams Using Modified Shear Deformation Theories [Volume 1, Issue 2, 2022, Pages 136-154]
Rostami, Hosein Experimental study and examination of failure zone factors and causes of destruction of thick metal sheets of rail cranes: mechanical properties, chemical analysis and metallography [Volume 3, Issue 2, 2023, Pages 267-284]
S
Sabzevari, Mohammad Investigation of hydroforming process loading paths based on experimental and improvement based on Sobol sensitivity analysis [Volume 2, Issue 1, 2022, Pages 53-72]
Sadeghi, Ali Defining of Mechanical Properties of Ago-1522 Living Cell Using Atomic Force Microscope [Volume 2, Issue 1, 2022, Pages 1-12]
Sadeghi, Ali Mechanical Specifications of the Skin Normal and Cancerous Cells Using Atomic Force Microscope [Volume 2, Issue 3, 2022, Pages 299-309]
Sadeghi, Ali Investigating mechanical properties of laser welding of st37 steel sheet using nd:yag laser [Volume 3, Issue 1, 2023, Pages 111-134]
Sadeghi, Ali Mechanical Analysis of Human Healthy and Cancerous Bone Cells Applying Atomic Force Microscope [Volume 4, Issue 3, 2024, Pages 513-540]
Sadeghi, Ali Investigating the Mechanical and Dynamic Characteristics of Healthy and Cancerous Mouse Brain Cells Using Atomic Force Microscopy and FEM Numerical Modeling [Volume 4, Issue 4, 2025, Pages 645-668]
Sadeghi Nezhad, M. S. Investigation on Effective Factors in Thermoelastic Analysis of FGM Rotating Drum in Air Turbine Engine under Nonlinear Thermal Loading [Volume 1, Issue 2, 2022, Pages 106-135]
Saeidi Abueshaghi, Reza Investigating and analyzing parameters affecting the bone drilling process using the Taguchi method. [Volume 4, Issue 1, 2024, Pages 139-157]
Safikhani, Hamed Performance analysis in square cyclones using Sobol statistical sensitivity analysis method [Volume 2, Issue 4, 2023, Pages 401-412]
Sahmani, Arsalan Numerical and Experimental Analysis of Response of Sandwich Panel with Fiber Metal Laminate (FML) Skin and Aluminum Foam Core under High Velocity Impact [Volume 4, Issue 3, 2024, Pages 404-424]
Sahraei, Mostafa Buckling Analysis of A Composite Stiffend Panel Structure In The Aircraft’s Wing [Volume 2, Issue 3, 2022, Pages 328-346]
Salamat-Talab, Mazaher Enhancing Mode II Interlaminar Fracture Toughness in Glass/Epoxy Composites Using 3D-Printed Polyvinyl Alcohol Interlayer [Volume 4, Issue 2, 2024, Pages 256-271]
Salehi, Ehsan A review on renewable biosorbents for the removal of pollutants by the adsorption process [Volume 2, Issue 3, 2022, Pages 257-298]
Salehi, Milad Investigation of the effect of turbulent friction process parameters on the surface mechanical properties of AZ31B/CNT nanocomposite using Sobel sensitivity analysis [Volume 2, Issue 1, 2022, Pages 108-122]
Salemian, Najmeh Exact analysis of transverse free vibration behavior of AFGM Timoshenko beams with general boundary conditions and tip masses [Volume 4, Issue 2, 2024, Pages 272-307]
Samadi Foroushan, mehran Aerodynamic modeling and calculating the flutter speed of a rectangular plate in supersonic air flow [Volume 3, Issue 2, 2023, Pages 194-215]
Sanaeepur, Hamidreza Improving properties of polyimide membrane using modified MOF for CO2/CH4 and CO2/N2 separations [Volume 4, Issue 4, 2025, Pages 669-683]
Sanjari Sarmad, Mostafa Design and weight optimization of a manned hybrid octocopter [Volume 4, Issue 3, 2024, Pages 425-448]
Sattarifar, Iraj Estimation of Fatigue Life in Al alloy Specimens Using FEA [Volume 1, Issue 1, 2021, Pages 56-71]
Sedehi, Sayyed Mohammad reza Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
Shabani, Fardin Analysis of the sensitivity of the parameters affecting the rate of removal, surface roughness and width in the wire electrical discharge machining [Volume 2, Issue 2, 2022, Pages 202-219]
Shafei, Ali Mohamad Modeling, Simulation, and Stability Analysis of Biped Robots Constructed of Flexible Links [Volume 4, Issue 2, 2024, Pages 207-237]
Shafieirad, Mohsen Using Sliding Mode Nonlinear Control Method to Model Nanomanipulation Process using Atomic Force Microscope [(Articles in Press)]
Shahriari, Behrooz Investigation on Effective Factors in Thermoelastic Analysis of FGM Rotating Drum in Air Turbine Engine under Nonlinear Thermal Loading [Volume 1, Issue 2, 2022, Pages 106-135]
Shahriari, Behrooz Buckling Analysis of A Composite Stiffend Panel Structure In The Aircraft’s Wing [Volume 2, Issue 3, 2022, Pages 328-346]
Shahriari, Behrooz Numerical and experimental analysis of the parameters affecting the distortion phenomenon in the welding of wind turbine tower flange [Volume 3, Issue 2, 2023, Pages 174-193]
Shahriari, Behrooz Thermoelastic Analysis of the FGM Rotating Disk Structure in the Free Turbine of the Turboshaft Engine Using the Differential Quadratic Method [Volume 3, Issue 4, 2024, Pages 516-536]
Shahrizadegan, Fatemeh Defining of Mechanical Properties of Ago-1522 Living Cell Using Atomic Force Microscope [Volume 2, Issue 1, 2022, Pages 1-12]
Shakeri, Faeze Study of DNA nanoparticle manipulation using atomic force microscopy based on finite element method using theories of contact mechanics [Volume 1, Issue 2, 2022, Pages 155-174]
Shams, Sogand A review on renewable biosorbents for the removal of pollutants by the adsorption process [Volume 2, Issue 3, 2022, Pages 257-298]
Sharifi, Mahdi Thermoelastic Analysis of the FGM Rotating Disk Structure in the Free Turbine of the Turboshaft Engine Using the Differential Quadratic Method [Volume 3, Issue 4, 2024, Pages 516-536]
Sheykholeslami, Mohammadreza Experimental Investigation of Adhesion of Synthetic Pyramid Shape Gecko-like Micro-structured Adhesive for Grippers Made of Silgard 184 [Volume 1, Issue 1, 2021, Pages 43-55]
Shokatzadeh, Majid Design, Fabrication, and Performance Evaluation of an Air-Oil Separation Unit in Hydraulic Power Transmission Systems: A Numerical and Experimental Study [Volume 5, Issue 1, 2025, Pages 112-88]
Sohrabnejad, Saba Fabrication of selective heterogeneous cation exchange membrane by using synthesized metal-organic framework for heavy metal ions removal from water [(Articles in Press)]
Soleymani, Leila Effect of Internal Cellular Geometry on the Impact Performance of 3D-Printed Structures [Volume 4, Issue 4, 2025, Pages 623-644]
Soleymani, Meysam Catalytic Degradation of tetracycline in Aqueous Media via LaMnO3 Nanostructures in Advanced Oxidation Process [Volume 4, Issue 2, 2024, Pages 350-368]
Soleymani, Meysam Investigations of the Mechanical Properties of DLP 3D Printed Graphene/Poly-Amide Composites in different printing directions [Volume 4, Issue 2, 2024, Pages 189-206]
Soltani, Mohsen An Analytical, Numerical and Experimental Study on Demagnetization Phenomena in Permanent Magnet Line-Start Machine [Volume 3, Issue 2, 2023, Pages 157-173]
Soury, Ehsan Experimental Study on Additive Friction Stir-Enabled Solid State Manufacturing For The Repair of Copper. [Volume 4, Issue 3, 2024, Pages 369-386]
Sousanabadi Farahani, Amin Investigating the effectiveness of polymethyl methacrylate drilling parameters using coated tools. [Volume 4, Issue 4, 2025, Pages 563-578]
T
Taheri, Ghodratollah Investigating and analyzing parameters affecting the bone drilling process using the Taguchi method. [Volume 4, Issue 1, 2024, Pages 139-157]
Taheri, Moein Study of DNA nanoparticle manipulation using atomic force microscopy based on finite element method using theories of contact mechanics [Volume 1, Issue 2, 2022, Pages 155-174]
Taheri, Moein Sensitivity analysis of parameters affecting cutting speed and dimensional deviation of wire electrical discharge machining [Volume 2, Issue 3, 2022, Pages 310-327]
Taheri, Moein Feasibility study of using the magnetic flux leakage test method in detecting defects in the coating of supply and distribution gas lines [Volume 2, Issue 4, 2023, Pages 432-448]
Taheri, Moein Performance analysis in square cyclones using Sobol statistical sensitivity analysis method [Volume 2, Issue 4, 2023, Pages 401-412]
Taheri, Moein Investigating the effective parameters on the mechanical properties of composites reinforced by jute fiber in the compression molding process [Volume 3, Issue 4, 2024, Pages 413-431]
Taheri, Moein Investigating the effectiveness of polymethyl methacrylate drilling parameters using coated tools. [Volume 4, Issue 4, 2025, Pages 563-578]
Tahmasbi, Vahid Experimental study of surface roughness of brass micro-drilling to optimize parameters using E-Fast statistical method [Volume 1, Issue 2, 2022, Pages 216-230]
Tahmasbi, Vahid Investigating and analyzing parameters affecting the bone drilling process using the Taguchi method. [Volume 4, Issue 1, 2024, Pages 139-157]
Tahmasbi, Vahid Modeling and Global Sensitivity Analysis of Surface Roughness in Cortical Bone Grinding process [Volume 5, Issue 1, 2025, Pages 20-42]
Tahmasebi, mona Design and Fabrication a Robotic Gripper with Drag and Drop capability based on Shape Memory polymer [(Articles in Press)]
Tahmasebi, Mona Design of Active Force Controller for Off-Road Seat Suspension equipped to MR Damper [Volume 1, Issue 2, 2022, Pages 175-200]
Tahmasebi, Mona Fabricate a Magnetic Nano Slime and Its Applications [Volume 3, Issue 3, 2023, Pages 398-412]
Talebian, Soheil Experimental Modeling of Magnetic Hysteresis Power Loss of Terfenol-D at Different Values of Frequency and Mechanical Pre-Stress [Volume 1, Issue 1, 2021, Pages 15-31]
Talebitooti, Roohollah A Unique Approach to Investigate the Free Vibrations of Non-uniform and Functionally Graded Euler-Bernoulli Beams [Volume 2, Issue 4, 2023, Pages 463-487]
Talebitooti, Roohollah The exact characteristic equation of frequency and mode shape for transverse vibrations of non-uniform and non-homogeneous Euler Bernoulli beam with general non-classical boundary conditions at both ends [Volume 3, Issue 1, 2023, Pages 1-20]
Teymouri, Mostafa The Effect of porosity distribution on the free vibration of tapered nanocomposite sandwich beam [Volume 4, Issue 1, 2024, Pages 1-19]
Tikani, Reza Energy Harvesting from Beam Vibrations with Piezoelectric Patch under Transient Non-Contact Mass, Applicable in Speed Bumps [Volume 4, Issue 4, 2025, Pages 579-596]
Torabi, Ali Sensitivity analysis of effective parameters on bone drilling force by using E-fast method [Volume 3, Issue 1, 2023, Pages 83-94]
V
Velashjerdi, Mohammad Investigations of the Mechanical Properties of DLP 3D Printed Graphene/Poly-Amide Composites in different printing directions [Volume 4, Issue 2, 2024, Pages 189-206]
Y
Yazdi, Sayyed Hashem Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
Yeganehfar, Hadi Experimental investigation of mechanical properties of modified tourmaline on epoxy/silica nanocomposite [Volume 3, Issue 4, 2024, Pages 560-575]
Yousefi, Peyman Solution of out-of-Plane vibration of moderately thick rectangular nano-plate using nonlocal sinusoidal shear deformation theory [Volume 1, Issue 2, 2022, Pages 231-246]
Yousefzadeh Kouhbanani, Mohammad Ehsan Modeling, Simulation, and Stability Analysis of Biped Robots Constructed of Flexible Links [Volume 4, Issue 2, 2024, Pages 207-237]
Z
Zamzami, Behnam Experimental investigation of induction hardening operation of the Saina vehicle’s Tulip part [Volume 5, Issue 1, 2025, Pages 72-87]
Zeinalizad, Leila Sensitivity Analysis of contact frictional models of Biological Particles on Rough Surface in Liquid Environment by E-Fast Method [Volume 4, Issue 1, 2024, Pages 86-121]
Zobeid, Sadegh Forced vibration of a three-layer cylindrical shell with an auxetic core containing fluid under the influence of shock load using high-order shear deformation theories [Volume 3, Issue 4, 2024, Pages 432-465]
Zolfaghari, Mojtaba Atomistic simulation of the effect of loading direction on the deformation mechanism of nickel-based superalloy containing a twin boundary [Volume 4, Issue 3, 2024, Pages 449-478]
