Adineh, Mahdi Natural Frequency analysis of Multi-directional Functionally Graded Rectangular Plates on elastic Foundation using Three-dimensional Elasticity Theory [Volume 4, Issue 1, 2024, Pages 40-63]
Ahmadi, Reyhane Improving properties of polyimide membrane using modified MOF for CO2/CH4 and CO2/N2 separations [Volume 4, Issue 4, 2025, Pages 669-683]
Alaei, Mohammad Hossein Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
Amin Far, Mohammad Reza Investigating the Mechanical and Dynamic Characteristics of Healthy and Cancerous Mouse Brain Cells Using Atomic Force Microscopy and FEM Numerical Modeling [Volume 4, Issue 4, 2025, Pages 645-668]
Arjmand, Hamid Optimization of Composite Shaft Subjected to Torsional Loading by Using Genetic Algorithm and Particle Swarm Optimization Methods [Volume 4, Issue 1, 2024, Pages 64-85]
Azamirad, Ghasem Optimization of Composite Shaft Subjected to Torsional Loading by Using Genetic Algorithm and Particle Swarm Optimization Methods [Volume 4, Issue 1, 2024, Pages 64-85]
B
Babaei Zarch, Mohammad reza Investigation of the effect of alomina nanoparticle on stir casting method parameters on mechanical properties of aluminum-based nanocomposites [Volume 4, Issue 3, 2024, Pages 479-496]
Bambaeechee, Mohsen Exact analysis of transverse free vibration behavior of AFGM Timoshenko beams with general boundary conditions and tip masses [Volume 4, Issue 2, 2024, Pages 272-307]
Baniasadi, Ali Experimental Study on Additive Friction Stir-Enabled Solid State Manufacturing For The Repair of Copper. [Volume 4, Issue 3, 2024, Pages 369-386]
Beyranvand, Hamed Experimental and numerical investigation of impact properties of epoxy biocomposite reinforced with nanocellulose and Lorestan rosemary plant extract [Volume 4, Issue 4, 2025, Pages 541-562]
D
Dehghan Hamadan, Ali Investigation of the effect of alomina nanoparticle on stir casting method parameters on mechanical properties of aluminum-based nanocomposites [Volume 4, Issue 3, 2024, Pages 479-496]
E
Ebadi, Abtin Improving properties of polyimide membrane using modified MOF for CO2/CH4 and CO2/N2 separations [Volume 4, Issue 4, 2025, Pages 669-683]
Eskandari Jam, Jafar investigate the response of hierarchical square thin-walled structures that made of ABS polymer and made by a 3D printer under lateral impact [Volume 4, Issue 1, 2024, Pages 158-188]
Eskandari Jam, Jafar Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
Esmaeili, Mostafa Experimental Analysis of Flow-Induced Vibrations and Energy Harvesting in a Wind Tunnel Using Tree Leaf-Inspired Geometries [Volume 4, Issue 4, 2025, Pages 684-701]
Ezazdi, Hadi Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
F
Farahani, Ali Investigation and Sensitivity Analysis of the Effect of Different Parameters on Tool Wear During Dry Turning Process of Aluminum Matrix Composites Using E-Fast Method [Volume 4, Issue 2, 2024, Pages 308-327]
Faraji, Hamed Investigation and Sensitivity Analysis of the Effect of Different Parameters on Tool Wear During Dry Turning Process of Aluminum Matrix Composites Using E-Fast Method [Volume 4, Issue 2, 2024, Pages 308-327]
Farhadi, Sirwan Design and weight optimization of a manned hybrid octocopter [Volume 4, Issue 3, 2024, Pages 425-448]
Farzami, Faezeh Catalytic Degradation of tetracycline in Aqueous Media via LaMnO3 Nanostructures in Advanced Oxidation Process [Volume 4, Issue 2, 2024, Pages 350-368]
Fazlali, Alireza Catalytic Degradation of tetracycline in Aqueous Media via LaMnO3 Nanostructures in Advanced Oxidation Process [Volume 4, Issue 2, 2024, Pages 350-368]
G
Ghasemi-Ghalebahman, Ahmad Investigation of the Effect of Texture on the Deformation Behavior of Additively Manufactured 316L Stainless Steel Using the Crystal Plasticity Finite Element Method [Volume 4, Issue 3, 2024, Pages 387-403]
Ghayour, Mostafa Energy Harvesting from Beam Vibrations with Piezoelectric Patch under Transient Non-Contact Mass, Applicable in Speed Bumps [Volume 4, Issue 4, 2025, Pages 579-596]
Ghorbanpour Arani, Ali The Effect of porosity distribution on the free vibration of tapered nanocomposite sandwich beam [Volume 4, Issue 1, 2024, Pages 1-19]
H
Habibnejad korayem, Moharram Sensitivity Analysis of contact frictional models of Biological Particles on Rough Surface in Liquid Environment by E-Fast Method [Volume 4, Issue 1, 2024, Pages 86-121]
Haghani, Ahmad Study of Buckling and Post-buckling Behavior of Composite Beam Reinforced with Graphene Nanoplatelets Using Non-local Strain Gradient Theory [Volume 4, Issue 2, 2024, Pages 328-349]
Hajimousaei, Behnam investigate the response of hierarchical square thin-walled structures that made of ABS polymer and made by a 3D printer under lateral impact [Volume 4, Issue 1, 2024, Pages 158-188]
Heydari Beni, Mohsen investigate the response of hierarchical square thin-walled structures that made of ABS polymer and made by a 3D printer under lateral impact [Volume 4, Issue 1, 2024, Pages 158-188]
Heydari Beni, Mohsen Numerical and Experimental Analysis of Response of Sandwich Panel with Fiber Metal Laminate (FML) Skin and Aluminum Foam Core under High Velocity Impact [Volume 4, Issue 3, 2024, Pages 404-424]
Heydari Meybodi, Mahdi Optimization of Composite Shaft Subjected to Torsional Loading by Using Genetic Algorithm and Particle Swarm Optimization Methods [Volume 4, Issue 1, 2024, Pages 64-85]
Homayooni, Ahmad Investigation and Sensitivity Analysis of the Effect of Different Parameters on Tool Wear During Dry Turning Process of Aluminum Matrix Composites Using E-Fast Method [Volume 4, Issue 2, 2024, Pages 308-327]
Hosseini, S. H. Design and Finite Element Analysis of Cycloidal Gearboxes [Volume 4, Issue 2, 2024, Pages 238-255]
J
Jabarzadeh, Sina Investigation of the Effect of Texture on the Deformation Behavior of Additively Manufactured 316L Stainless Steel Using the Crystal Plasticity Finite Element Method [Volume 4, Issue 3, 2024, Pages 387-403]
Jabbari, Ali Experimental Study on Additive Friction Stir-Enabled Solid State Manufacturing For The Repair of Copper. [Volume 4, Issue 3, 2024, Pages 369-386]
Jafari, Ali Mechanical Analysis of Human Healthy and Cancerous Bone Cells Applying Atomic Force Microscope [Volume 4, Issue 3, 2024, Pages 513-540]
Jalali, Ali Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
Joudaki, Jalal Design and Finite Element Analysis of Cycloidal Gearboxes [Volume 4, Issue 2, 2024, Pages 238-255]
K
Karami Khorramabadi, Mahdi Experimental and numerical investigation of impact properties of epoxy biocomposite reinforced with nanocellulose and Lorestan rosemary plant extract [Volume 4, Issue 4, 2025, Pages 541-562]
Kashfi, Mohammad Effect of Internal Cellular Geometry on the Impact Performance of 3D-Printed Structures [Volume 4, Issue 4, 2025, Pages 623-644]
Kazemi, Hossein Enhancing Mode II Interlaminar Fracture Toughness in Glass/Epoxy Composites Using 3D-Printed Polyvinyl Alcohol Interlayer [Volume 4, Issue 2, 2024, Pages 256-271]
Kazemi, Hossein Effect of Internal Cellular Geometry on the Impact Performance of 3D-Printed Structures [Volume 4, Issue 4, 2025, Pages 623-644]
Khosravi, Mohammad Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
L
Lafouti, Mansoureh Mechanical Analysis of Human Healthy and Cancerous Bone Cells Applying Atomic Force Microscope [Volume 4, Issue 3, 2024, Pages 513-540]
Lafouti, Mansoureh Investigating the Mechanical and Dynamic Characteristics of Healthy and Cancerous Mouse Brain Cells Using Atomic Force Microscopy and FEM Numerical Modeling [Volume 4, Issue 4, 2025, Pages 645-668]
M
Mahdizadeh Rokhi, Masoud Investigation of the effect of alomina nanoparticle on stir casting method parameters on mechanical properties of aluminum-based nanocomposites [Volume 4, Issue 3, 2024, Pages 479-496]
Manshoor, D. Design and Finite Element Analysis of Cycloidal Gearboxes [Volume 4, Issue 2, 2024, Pages 238-255]
Maraki, Mohammadreza Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
Mir Mohammad Hossein Ahari, Seyed Mahyar Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
Mohammadi, Mohammad Javad Investigating the effectiveness of polymethyl methacrylate drilling parameters using coated tools. [Volume 4, Issue 4, 2025, Pages 563-578]
Momeni, Hossein Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
Mozafari, Hamid Experimental and numerical investigation of impact properties of epoxy biocomposite reinforced with nanocellulose and Lorestan rosemary plant extract [Volume 4, Issue 4, 2025, Pages 541-562]
N
Nadaf, Alireza Finite element and experimental investigation of the direct flow forming process of thin-walled high-strength steel tubes [Volume 4, Issue 1, 2024, Pages 122-138]
Najibi, Amir Investigation of the Effect of Texture on the Deformation Behavior of Additively Manufactured 316L Stainless Steel Using the Crystal Plasticity Finite Element Method [Volume 4, Issue 3, 2024, Pages 387-403]
Nasiri, Ramin Energy Harvesting from Beam Vibrations with Piezoelectric Patch under Transient Non-Contact Mass, Applicable in Speed Bumps [Volume 4, Issue 4, 2025, Pages 579-596]
Nourbakhsh, Sayed Hassan Atomistic simulation of the effect of loading direction on the deformation mechanism of nickel-based superalloy containing a twin boundary [Volume 4, Issue 3, 2024, Pages 449-478]
Nourbakhsh, Sayed Hassan Effect of Internal Cellular Geometry on the Impact Performance of 3D-Printed Structures [Volume 4, Issue 4, 2025, Pages 623-644]
P
Pirali, Pooya investigate the response of hierarchical square thin-walled structures that made of ABS polymer and made by a 3D printer under lateral impact [Volume 4, Issue 1, 2024, Pages 158-188]
Pirali, Pooya Numerical and Experimental Analysis of Response of Sandwich Panel with Fiber Metal Laminate (FML) Skin and Aluminum Foam Core under High Velocity Impact [Volume 4, Issue 3, 2024, Pages 404-424]
Pirali, Pooya Statistical-Numerical Analysis of the Geometric and Mechanical Effects of Adhesive on the Strength of Single-Edge Joints Under Tensile Loading [Volume 4, Issue 4, 2025, Pages 597-622]
R
Rabiee, Amir Hossein Experimental Analysis of Flow-Induced Vibrations and Energy Harvesting in a Wind Tunnel Using Tree Leaf-Inspired Geometries [Volume 4, Issue 4, 2025, Pages 684-701]
Rahmani, Nima Investigation and Sensitivity Analysis of the Effect of Different Parameters on Tool Wear During Dry Turning Process of Aluminum Matrix Composites Using E-Fast Method [Volume 4, Issue 2, 2024, Pages 308-327]
Rashidi Meybodi, Reza Investigation of the effect of alomina nanoparticle on stir casting method parameters on mechanical properties of aluminum-based nanocomposites [Volume 4, Issue 3, 2024, Pages 479-496]
S
Sadeghi, Ali Mechanical Analysis of Human Healthy and Cancerous Bone Cells Applying Atomic Force Microscope [Volume 4, Issue 3, 2024, Pages 513-540]
Sadeghi, Ali Investigating the Mechanical and Dynamic Characteristics of Healthy and Cancerous Mouse Brain Cells Using Atomic Force Microscopy and FEM Numerical Modeling [Volume 4, Issue 4, 2025, Pages 645-668]
Saeidi Abueshaghi, Reza Investigating and analyzing parameters affecting the bone drilling process using the Taguchi method. [Volume 4, Issue 1, 2024, Pages 139-157]
Sahmani, Arsalan Numerical and Experimental Analysis of Response of Sandwich Panel with Fiber Metal Laminate (FML) Skin and Aluminum Foam Core under High Velocity Impact [Volume 4, Issue 3, 2024, Pages 404-424]
Salamat-Talab, Mazaher Enhancing Mode II Interlaminar Fracture Toughness in Glass/Epoxy Composites Using 3D-Printed Polyvinyl Alcohol Interlayer [Volume 4, Issue 2, 2024, Pages 256-271]
Salemian, Najmeh Exact analysis of transverse free vibration behavior of AFGM Timoshenko beams with general boundary conditions and tip masses [Volume 4, Issue 2, 2024, Pages 272-307]
Sanaeepur, Hamidreza Improving properties of polyimide membrane using modified MOF for CO2/CH4 and CO2/N2 separations [Volume 4, Issue 4, 2025, Pages 669-683]
Sanjari Sarmad, Mostafa Design and weight optimization of a manned hybrid octocopter [Volume 4, Issue 3, 2024, Pages 425-448]
Sedehi, Sayyed Mohammad reza Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
Shafei, Ali Mohamad Modeling, Simulation, and Stability Analysis of Biped Robots Constructed of Flexible Links [Volume 4, Issue 2, 2024, Pages 207-237]
Soleymani, Leila Effect of Internal Cellular Geometry on the Impact Performance of 3D-Printed Structures [Volume 4, Issue 4, 2025, Pages 623-644]
Soleymani, Meysam Catalytic Degradation of tetracycline in Aqueous Media via LaMnO3 Nanostructures in Advanced Oxidation Process [Volume 4, Issue 2, 2024, Pages 350-368]
Soleymani, Meysam Investigations of the Mechanical Properties of DLP 3D Printed Graphene/Poly-Amide Composites in different printing directions [Volume 4, Issue 2, 2024, Pages 189-206]
Soury, Ehsan Experimental Study on Additive Friction Stir-Enabled Solid State Manufacturing For The Repair of Copper. [Volume 4, Issue 3, 2024, Pages 369-386]
Sousanabadi Farahani, Amin Investigating the effectiveness of polymethyl methacrylate drilling parameters using coated tools. [Volume 4, Issue 4, 2025, Pages 563-578]
T
Taheri, Ghodratollah Investigating and analyzing parameters affecting the bone drilling process using the Taguchi method. [Volume 4, Issue 1, 2024, Pages 139-157]
Taheri, Moein Investigating the effectiveness of polymethyl methacrylate drilling parameters using coated tools. [Volume 4, Issue 4, 2025, Pages 563-578]
Tahmasbi, Vahid Investigating and analyzing parameters affecting the bone drilling process using the Taguchi method. [Volume 4, Issue 1, 2024, Pages 139-157]
Teymouri, Mostafa The Effect of porosity distribution on the free vibration of tapered nanocomposite sandwich beam [Volume 4, Issue 1, 2024, Pages 1-19]
Tikani, Reza Energy Harvesting from Beam Vibrations with Piezoelectric Patch under Transient Non-Contact Mass, Applicable in Speed Bumps [Volume 4, Issue 4, 2025, Pages 579-596]
V
Velashjerdi, Mohammad Investigations of the Mechanical Properties of DLP 3D Printed Graphene/Poly-Amide Composites in different printing directions [Volume 4, Issue 2, 2024, Pages 189-206]
Y
Yazdi, Sayyed Hashem Is it possible to improve the surface properties by controlling the machining process at the same time as the parts are made? An empirical study of the effect of speed and flow rate variables of the wire cut machine on the surface properties of CK45 [Volume 4, Issue 3, 2024, Pages 497-512]
Yousefzadeh Kouhbanani, Mohammad Ehsan Modeling, Simulation, and Stability Analysis of Biped Robots Constructed of Flexible Links [Volume 4, Issue 2, 2024, Pages 207-237]
Z
Zeinalizad, Leila Sensitivity Analysis of contact frictional models of Biological Particles on Rough Surface in Liquid Environment by E-Fast Method [Volume 4, Issue 1, 2024, Pages 86-121]
Zolfaghari, Mojtaba Atomistic simulation of the effect of loading direction on the deformation mechanism of nickel-based superalloy containing a twin boundary [Volume 4, Issue 3, 2024, Pages 449-478]
