Mechanic of Advanced and Smart Materials
Quarterly

Investigation, sensitivity analysis and optimization of effective parameters of roughness geometry of absorber plates of solar air heaters with repeating V-shaped geometry on Nusselt number

Document Type : Original Article

Authors

Saeed Tahmasbi 1
Abdolreza Moghadassi 2
Hamed Safikhani 2

1 daneshkade mohandesi

2 ARAK UNIVERSITY

10.66224/masm.2026.2087180.1186
Abstract
Solar air heaters are widely used to save energy, especially in cases where high temperatures are not required. Among its applications are space heating, water desalination, and drying a range of products, including marine products that are used continuously. Since the thermal efficiency of solar air heaters is low, most research in investigating the types of roughness in terms of shape, size, and orientation concerning the flow direction tries to achieve an optimal arrangement and geometry of the roughness.

This article attempts to make the Nusselt number in a rectangular channel with artificial roughness and a V-shaped arrangement repeatable.

In addition, this air heater and the method of changing the parameters are investigated and optimized to the geometry of the roughness and operating parameters.

In this article, while examining solar air heaters and the roughness geometry of their absorber plates, a systematic analysis using statistical modeling method, Sobel sensitivity analysis, for important process input parameters including Reynolds number, relative groove height, relative groove pitch and angle of incidence in the geometry of artificial roughness of the absorber plate of the solar air heater, has been carried out on the behavior of the Nusselt number output responses.

This article also discusses single-objective optimization to achieve the highest Nusselt number using the Deringer statistical algorithm.

Keywords

Solar air heaters Sensitivity analysis
Absorber plate geometry
Artificial roughness
[1]    Ravi RK, Saini RP, Saini JS. A review on different techniques used for performance enhancement of double pass solar air heaters. Renew Sustain Energy Rev. 2016;56:941–52.
[2]    Pottler K, et al. Optimized finned absorber geometries for solar air heating collectors. Sol Energy. 1999;67(1–3):35–52.
[3]    Suman S, Khan MK, Pathak M. Performance enhancement of solar collectors—A review. Renew Sustain Energy Rev. 2015;49:192–210.
[4]    Senthil R, Cheralathan M. Solar integrated collector storage using Fresnel lens for domestic hot water. Int J Eng Res Dev. 2012;2(12):53–7.
[5]    Pottler K, et al. Optimized finned absorber geometries for solar air heating collectors. Sol Energy. 1999;67(1–3):35–52.
[6]    Akpinar EK, Koçyiğit F. Energy and exergy analysis of a new flat-plate solar air heater having different obstacles on absorber plates. Appl Energy. 2010;87(11):3438–50.
[7]    Srivastava RK, Rai AK. A review on solar air heater technology. Int J Mech Eng Technol. 2017;8(7):1122–31.
[8]    Naphon P. On the performance and entropy generation of the double-pass solar air heater with longitudinal fins. Renew Energy. 2005;30(9):1345–57.
[9]    Yadav AS, Bhagoria JL. A CFD based thermo-hydraulic performance analysis of an artificially roughened solar air heater having equilateral triangular sectioned rib roughness on the absorber plate. Int J Heat Mass Transf. 2014;70:1016–39.
[10]    Lalji MK, Sarviya R, Bhagoria J. Heat transfer enhancement in packed bed solar air heater. Indian J Sci Technol. 2011;4(7):747–9.
[11]    Hans VS, Saini RP, Saini JS. Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with multiple V-ribs. Sol Energy. 2010;84(6):898–911.
Mechanic of Advanced and Smart Materials
Volume 5, Issue 4
Winter 2026
Pages 527-550

  • Receive Date 29 April 2026
  • Revise Date 04 September 2026
  • Accept Date 18 September 2026

Home

Guide for Authors

Submit Manuscript

Contact Us