[1] Kok M. Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites. Journal of Materials Processing Technology. 2005;161:381-7.
[2] Radhika N, Subramanian R, Prasat SV. Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques. Journal of Minerals and Materials Characterization and Engineering. 2011;10:427-43.
[3] Gewfiel E, El-Meniawi MAH, Fouad Y. The effects of graphite and SiC formation on mechanical and wear properties of aluminum-graphite (Al/Gr) composites. 2012 International Conference on Engineering and Technology (ICET): Institute of Electrical & Electronics Engineers (IEEE); 2012.
[4] Omrani E, Moghadam AD, Menezes PL, Rohatgi PK. Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy\ efficiency—a review. The International Journal of Advanced Manufacturing Technology. 2016;83:325-46.
[5] Wu LL, Yang WJ, Xu JR, Yao GC. Wear Resistance of Graphite / Aluminium Composites that Prepared by Stirring Casting. AMR. 2013;683:333-8.
[6] Omrani E, Moghadam AD, Algazzar M, Menezes PL, Rohatgi PK. Effect of graphite particles on improving tribological properties Al-16Si-5Ni-5Graphite self-lubricating composite under fully flooded and starved lubrication conditions for transportation applications. The International Journal of Advanced Manufacturing Technology. 2016:1-11.
[7] Rohatgi PK, Ray S, Liu Y. Tribological properties of metal matrix-graphite particle composites. International Materials Reviews. 1992;37:129-52.
[8] Yang JB, Lin CB, Wang TC, Chu HY. The tribological characteristics of A356.2Al alloy/Gr(p) composites. Wear. 2004;257:941-52.
[9] Liu Y, Rohatgi PK, Ray S. Tribological characteristics of aluminum-50 Vol Pct graphite composite. MTA.1993;24:151-9.
[10] Shanmughasundaram P. Investigation on the Wear Behaviour of Eutectic Al-Si Alloy– Al2O3 - Graphite Composites Fabricated Through Squeeze Casting. Materials Research. 2014.
[11] Suresha S, Sridhara BK. Effect of silicon carbide particulates on wear resistance of graphitic aluminium matrix composites. Materials & Design. 2010;31:4470-7.
[12] Rajan TPD, Pillai RM, Pai BC. Centrifugal casting of functionally graded aluminium matrix composite components. International Journal of Cast Metals Research. 2008;21:214-8.
[13] Rajan TPD, Pillai RM, Pai BC. Characterization of centrifugal cast functionally graded aluminum-silicon carbide metal matrix composites. Materials Characterization. 2010;61:923-8.
[14] Huang X, Liu C, Lv X, Liu G, Li F. Aluminum alloy pistons reinforced with SiC fabricated by centrifugal casting. Journal of Materials Processing Technology. 2011;211:1540-6.
[15] Watanabe Y, Kawamoto A, Matsuda K. Particle size distributions in functionally graded materials fabricated by the centrifugal solid-particle method. Composites Science and Technology. 2002;62:881-8.
[16] Wang K, Cheng J, Sun W, Xue H. An approach for increase of reinforcement content in particle rich zone of centrifugally cast SiCP/Al composites. Journal of Composite Materials. 2012;46:1021-7.
[17] Hassan AM, Hayajneh MT, Al-Omari MA-H. The effect of the increase in graphite volumetric percentage on the strength and hardness of Al-4 weight percent Mg-graphite composites. Journal of Materials Engineering and Performance. 2002;11:250-5.
[18] Guo MLT, Tsao CYA. Tribological behavior of self-lubricating aluminium/SiC/graphite hybrid composites synthesized by the semi-solid powder-densification method. Composites Science and Technology.2000;60:65-74.
[19] Robert Redhill, Principles of Physical Metallurgy. 2009.
[20] Lim YY, Chaudhri MM. The influence of grain size on the indentation hardness of high-purity copper and aluminium. Philosophical Magazine A. 2002;82:2071-80.
[21] Vencl A, Bobic I, Arostegui S, Bobic B, Marinković A, Babić M. Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC + graphite particles. Journal of Alloys and Compounds. 2010;506:631-9.
[22] Vencl A, Bobić I, Jovanović MT, Babić M, Mitrović S. Microstructural and Tribological Properties of A356 Al–Si Alloy Reinforced with Al2O3 Particles. Tribology Letters. 2008;32:159-70.
[23] Ames W, Alpas AT. Wear mechanisms in hybrid composites of Graphite-20 Pct SiC in A356 Aluminum Alloy (Al-7 Pct Si-0.3 Pct Mg). MMTA. 1995;26:85-98.
[24] Jha AK, Prasad SV, Upadhyaya GS. Dry sliding wear of sintered 6061 aluminium alloy— graphite particle composites. Tribology International. 1989;22:321-7.
[25] Radhika N, Subramanian R, Venkat Prasat S, Anandavel B. Dry sliding wear behaviour of aluminium/alumina/graphite hybrid metal matrix composites. Industrial Lubrication and Tribology.2012;64:359-66.
[26] Ted Guo ML, Tsao CYA. Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites. Materials Science and Engineering: A. 2002;333:134-45.
[27] Akhlaghi F, Zare-Bidaki A. Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy method. Wear. 2009;266:37-45.
[28] Mahdavi S, Akhlaghi F. Effect of the Graphite Content on the Tribological Behavior of Al/Gr and Al/30SiC/Gr Composites Processed by In Situ Powder Metallurgy (IPM) Method. Tribology Letters.2011;44:1-12.
[29] Fathi R, Ma A, Saleh B, Xu Q, Jiang J. Investigation on mechanical properties and wear performance of functionally graded AZ91-SiCp composites via centrifugal casting. Materials Today Communications. 2020.24(1);24:101169.
[30] Adib M H, Abedinzadeh R. Study of mechanical properties and wear behavior of hybrid Al/(Al2O3+SiC) nanocomposites fabricated by powder technology. Materials Chemistry and Physics. 2023; 305: 127922.