Experimental Investigation of Adhesion of Synthetic Pyramid Shape Gecko-like Micro-structured Adhesive for Grippers Made of Silgard 184

Pourmirza Agha Langroudi,, Iman; Modabberifar, Mehdi; Sheykholeslami, Mohammadreza; Hemmati, Milad

doi:10.52547/masm.1.1.43

Experimental Investigation of Adhesion of Synthetic Pyramid Shape Gecko-like Micro-structured Adhesive for Grippers Made of Silgard 184

Document Type : Original Article

Authors

Iman Pourmirza Agha Langroudi,

Mehdi Modabberifar

Mohammadreza Sheykholeslami

Milad Hemmati

Department of mechanical engineering, Faculty of Engineering, َ Arak University, Arak, Iran

https://doi.org/10.52547/masm.1.1.43

Abstract

In recent years, gecko-like dry adhesives have been used in robotic grippers and climbing robots. The adhesive has been introduced as a new approach for manipulating ﬂat objects in production lines. The method has several advantages over other, more traditional, gripping methods such as lower power consumption compared to suction-based systems or the ability to handle non-magnetic materials. Directional Gecko-like adhesives are based on the frictional adhesion and employ asymmetric feature, mostly wedge shape, and perform only in one direction. In this paper, design and fabrication process of a new pyramid shape Gecko-like adhesive using silgard 184 has been described. The new microstructures has the ability of adhesion in several directions, and the contact surface between the adhesive and substrate increases and the possibility of self-sticking between adjacent stalks decreases. Chemical machining and microlithography were used for manufacturing molds in this research and the details were described. The performance of proposed adhesive was evaluated using an experimental set-up and adhesion force was measured on different substrate. During experiments, adhesion was controlled via applied shear force to adhesive. The experimental results showed 30% increase in adhesion using proposed adhesive in comparison with the existing similar adhesive.

Keywords

Gecko-like adhesive

Microlithography

Chemical machining

Gripper

Silgard 184

20.1001.1.27834220.1400.1.1.4.2

[1] Parness A, Kennedy B A, Heverly M C, Cutkosky M R, Hawkes E W. Grippers based on opposing van der waals adhesive pads. Google Patents; 2016.
[2] Dadkhah M, Zhao Z, Wettels N, Spenko M. A self-aligning gripper using an electrostatic/gecko-like adhesive. in International Conference on Intelligent Robots and Systems (IROS). 2016;1006-1011.
[3] Modabberifar M, Spenko M. Development of a gecko-like robotic gripper using scott–russell mechanisms. Robotica. 2020;38:541-549.
[4] Santos D, Spenko M, Parness A, Kim S, Cutkosky M. Directional adhesion for climbing: theoretical and practical considerations. Journal of Adhesion Science and Technology. 2007;21:1317-1341.
[5] Parness A, Soto D, Esparza N, Gravish N, Wilkinson M, Autumn K, Cutkosky M. A microfabricated wedgeshaped adhesive array displaying gecko-like dynamic adhesion, directionality and long lifetime. Journal of the Royal Society Interface. 2009;6:1223-1232.
[6] Davoudinejad A, Ribo M M, Pedersen D B, Islam A, Tosello G. Direct fabrication of bio-inspired gecko-like geometries with vat polymerization additive manufacturing method. Journal of Micromechanics and Microengineering. 2018;28:085009.
[7] Day P, Eason E V, Esparza N, Christensen D, Cutkosky M. Microwedge machining for the manufacture of directional dry adhesives. Journal of Micro and Nano-Manufacturing. 2013;1:011001.
[8] Geim A K, Dubonos S V, Grigorieva I V, Novoselov K S, Zhukov A A, Shapoval S Y. Microfabricated adhesive mimicking gecko foot-hair. Nature materials. 2003;2:461-463.
[9] Modabberifar M, Spenko M. A shape memory alloy-actuated gecko-inspired robotic gripper. Sensors and Actuators A: Physical. 2018;276:76-82.
[10] Hosein Mirzaee R, Modabberifar M. A solenoid actuated gecko-like robotic gripper. Iranian Journal of Manufacturing Engineering. 2019;6:43-50.